MILC CAN BE AS CONVENIENT AS POINT-AND-SHOOT
Install X-CAP on your Lens. Never lose your lens cap again!
Instant and automatic operation. Ultimate in convenience.
Minimal change to camera’s appearance and functionality. Barely noticeable.
SHUTTER OVERLAP FOR SUPERIOR DUST PROTECTION
Lens cap shutters overlap for to prevent dust from settling on the front of the lens.
STANDARD 37mm FILTER INTERFACE
Just squeeze the buttons and install it on the filter thread on the front of your lens.
FLUSH FITTING BUTTONS
After mounting the cap on the lens, the buttons remain flush with the outside of the device, improving the appearance of the device and minimizing the risk of snagging and losing the cap.
Current choices are white & silver, black & iron-gray.
First, turn the camera on and extend the lens (most important! – without this step it is impossible to install the X-Cap without damage).
Use your fingers to depress the spring-loaded buttons on either side of the X-Cap, causing the two ribbed fingers to be retracted, then insert them into the 37mm threaded section on the front of the lens (where a filter would be installed). Note, it is normal for significant pressure to have to be applied to the two buttons to fully retract the fingers.
Gently release the two buttons, ensuring the fingers are equally (symmetrically) positioned in the lens’ filter threads. When the buttons are totally released, the X-Cap should be flush with the front of the lens, firmly in place. View lens from side to ensure this is so.
- Operating Temperature 0 ~ 50 ℃ (32 ~ 122 ℉)
- Do not crush or deform the mechanism.
- Use a clean, damp cloth to clean the X-Cap. Do not use organic chemical cleaners.
Dimension: Φ57mm x 7.7mm（5.7mm height after installation）
Filter Size: Φ37mm
Material: ABS Plastic, Stainless Steel
Packaging Volume: 8cm x 7cm x 1.5cm
43-37 step-down adapter ring for X-CAP
Convert the filter thread of lens from 43mm to 37mm for X-CAP.
Compatible lens: Canon EF-M 22mm f/2
My camera is pink. Beside white and black, are there any other colors for X-CAP?
X-CAP is only available in white and black. Currently Freemod has no plans to produce X-CAP in any other color. In the event that the Panasonic LUMIX GX VARIO PZ 14-42mm lens (hereinafter referred to as the X14-42) is made available in additional colors in the future, we will consider producing X-CAP in matching colors.
If the lens has a UV filter installed, can I still use the lens cap?
X-CAP is compatible with the standard 37mm filter thread. X-CAP can be installed onto any 37mm filter thread, however, X-CAP is a dedicated lens cap specifically designed for a bare X14-42 lens and Freemod can only guarantee that the X-CAP properly operates on such a lens.
In addition to the X14-42, can I install X-CAP on my other lens?
Freemod is unable to test X-CAP on all the 37mm lenses on the market today (or in the future). Neither Freemod nor the lens manufacturer can provide any assurance of compatibility. The responsibility lays totally with the purchaser. Under no circumstances will Freemod’s guarantees extend to any attempt to use X-CAP on any lens other than the X14-42.